Offices Nationwide
Sound Insulation
Two parameters describe sound insulation; Dw and Rw. Dw is the insulation between rooms. Rw is the lab-tested insulation of a wall/floor...more
Sound Transmissions
Paths can be interrupted by insulation and blocking air paths. A material's insulation is governed by mass, stiffening and damping...more
Derbyshire - Domestic Part E Testing - 0114 368 0192
The office that covers this area is: Sheffield
The towns & cities that are covered within this county are:
Alfreton, Ashbourne, Bakewell, Belper, Bolsover, Buxton, Chapel en le Frith, Chesterfield, Clay Cross, Creswell, Derby, Dronfield, Glossop, Hadfield, Heanor, High Peak, Holloway, Hope Valley, Ilkeston, Langley Mill, Long Eaton, Matlock, Melbourne, New Mills, Ripley, Somercotes, Swadlincote, Whaley Bridge, Wirksworth,
Phone Number: 0114 368 0192 Email: derbyshire@e2consultants.co.uk
E2 Consultants deliver Sound Insulation Testing for new or refurbished dwellings in compliance with Part E of the Building Regulation in Derbyshire and nationwide.
As part of our service in Derbyshire we can also offer advice on the additional requirements of Approved Document Part E including the control of reverberation in common areas and the performance of internal walls and floors. We actively encourage clients to seek our services at the earliest opportunity as it is possible that the noise mitigation measures required in some instances, could dictate significant changes to external and internal layouts. Therefore our early involvement could remove the need for costly revisions.
E2 Consultants in Derbyshire are specialists in the provision of high quality and practical acoustic consultancy to both the public and private sectors; typically working with residential and commercial developers, architects, planning consultants, industry, local planning authorities and environmental services. Our consultants at Derbyshire can guide you through the process to ensure the best possible chance of achieving sound test passes. Call 0114 368 0192 or email derbyshire@e2consultants.co.uk
Pre-Completion Testing
The following table outlines the sets of tests that are required for New and Converted properties.
| Property Types | Test Requirements |
| Dwelling-houses Including bungalows | Normally, one set of tests should comprise of two individual Sound Insulation Tests (SITs)(two airborne tests):1. Living room (wall) And 2.Bedroom (wall) |
| Rooms for Residential Purposes | To conduct a set of tests, the sound insulation between the main rooms should be measured according to the principals set out above for new buildings and material change of use, but adapting them to suit the circumstances. |
| Flats with separating floor but not walls | Normally, one set of tests should comprise of four individual SITs (2 x airborn, 2 x impact): 1. Living room (Airborn), 2.Living room (Impact), 3. Bedroom (airborn) and 4. Bedroom (Impact) |
| Flats with separating floor and walls | Normally, one set of tests should comprise of six individual SITs (4 x airborne, 2 x impact): 1. living room/living room (floor, airborne), 2. living room/living room (floor, impact), 3. bedroom/bedroom (floor, airborne), 4. bedroom/bedroom (floor, impact), 5. living room/living room (wall, airborne), and 6. bedroom/bedroom (wall, airborne) |
Warning: count(): Parameter must be an array or an object that implements Countable in /data04/elite/public_html/Office.php on line 755
For further Domestic Part E Testing information for your area, be sure to check out Sound-Testing-Sheffield.co.uk.
Our other services include:
Domestic Part E Testing can also be known as:
Part E Sound Testing, Part E Sound Insulation Testing, Part E Testing, Domestic Part E, Sound Testing Part E, Domestic Part E Sound Testing, Domestic Part E Sound Insulation Testing, Domestic Sound Testing Part E, Part E, Sound Insulation Design Advice,
Copyright 2025 E2 Specialist Consultants Limited
Company No. 06728970