Hampshire - Domestic Carbon Emission Calculations - 0239 366 0106

The office that covers this area is: Portsmouth

The towns & cities that are covered within this county are:
Aldershot, Arlesford, Alton, Andover, Basingstoke, Bordon, Brockenhurst, Eastleigh, Emsworth, Fair Oak, Fareham, Farnborough, Fleet, Fordingbridge, Gosport, Hartley Wintney, Havant, Hayling Island, Hook, Hythe, Kingsclere, Lee-on-the-Solent, Liphook, Liss, Lymington, Lyndhurst, New Milton, Petersfield, Portchester, Portsmouth, Ringwood, Romsey, Rowlands Castle, Seaview, South Hayling, Southampton, Southsea, Stockbridge, Tadley, Tidworth, Totton, Waterlooville, Whitchurch, Winchester, Yateley,

Phone Number: 0239 366 0106 Email: hampshire@e2consultants.co.uk

SAP Calculations is sometimes referred to as SAP Conversion Assessment, SAP Conversion Calc, SAP Conversion Calculations, SAP Conversion Calcs, SAP Conversion rating, Part L1B Compliance.

Why Do I Need A SAP Calculation?

Under Part L of Building Regulations in Hampshire, since 2006, any new dwellings or conversions need to have a SAP Calculation and Predicted EPC before any work can begin.

You will need to provide information about energy efficiency in a Predicted Energy Assessment (PEA) if you are planning to sell the property before it has been built.

When changes are made to the heating, hot water provision or air conditioning/ventilation services, it is the responsibility of the builder to provide any On Construction EPCs upon completiong of a new home or conversion into fewer or more units.

What Is A SAP Calculation?

A SAP rating represents the cost of energy required by a property over the course of a year with a score of 100 meaning there's no energy cost. This is calculated from lighting, heating, hot water systems, renewable technolgies used and the elements of structure. The higher the score, the lower the cost of running it.

SAP calculations are the Government's Standard Assessment Procedure for Energy Ratings. In order to produce an On Construction EPC (Energy Performance Certificate) or a Predicted Energy Assessment (PEA), a SAP is required, as this is the calculation these certificates are based on.

How Is A SAP Assessment Undertaken?

A SAP is done off-site but requires plans and drawings of the site in order to be calculated. Amongst other things, the SAP assessor will determine how good the thermal elements are in the floors and walls and how well heat passes through these elements - this is known as a 'U' value. A high 'U' value represents a high amount of heat lost - this is used in the SAP calculation.

The SAP software will determine if a building complies with Building Regulations in Hampshire using the information provided by the SAP assessment. This crucial information relates to the type of dwelling, floors, walls, the roof, windows, doors, lighting, renewable technologies, 'U' values, hot water and ventilation.