Offices Nationwide
Sound Levels
Decibels (dB) are most commonly used as a measure of sound level, but they are also used in electronics, signals and communications...more
Environmental Noise Levels
The max exposure time at 85 dBA is 8 hours, at 110 dBA it's just 1 min 29 seconds. If exposed, limit the time and wear hearing protection...more
Kent - Domestic Sound Insulation Design Advice - 020 3390 0301
The office that covers this area is: London
The towns & cities that are covered within this county are:
Ash, Ashford, Aylesford, Beckenham, Belvedere, Bexley, Biddenden, Birchington, Borough Green, Broadstairs, Canterbury, Chatham, Chislehurst, Cranbrook, Crayford, Dartford, Deal, Dover, Dungeness, Dymchurch, East Peckham, Edenbridge, Erith, Eynsford, Faversham, Folkestone, Gillingham, Gravesend, Hawkhurst, Headcorn, Herne Bay, Hythe, Lamberhurst, Longfield, Lydd, Maidstone, Marden, Margate, Meopham, Minster, New Romney, Orpington, Paddock Wood, Penshurst, Rainham, Ramsgate, Rochester, Sandwich, Sevenoaks, Sheerness, Sidcup, Sittingbourne, Southborough, Staplehurst, Strood, Swanley, Tenterden, Tonbridge, Tunbridge Wells, Welling, West Malling, West Wickham, Westerham, Whitstable,
Phone Number: 020 3390 0301 Email: kent@e2consultants.co.uk
Sound Testing Part E is sometimes referred to as Domestic Sound Insulation Testing, Domestic Sound Testing, Domestic Acoustic Testing, Domestic Part E Compliance, Domestic Sound & Acoustic Insulation Testing.
E2 Consultants deliver Sound Insulation Testing for new or refurbished dwellings in compliance with Part E of the Building Regulation in Kent and nationwide.
As part of our service in Kent we can also offer advice on the additional requirements of Approved Document Part E including the control of reverberation in common areas and the performance of internal walls and floors.
We actively encourage clients to seek our services at the earliest opportunity as it is possible that the noise mitigation measures required in some instances, could dictate significant changes to external and internal layouts. Therefore our early involvement could remove the need for costly revisions.
Our consultants at Kent can guide you through the process to ensure the best possible chance of achieving sound test passes. Call 020 3390 0301 or email kent@e2consultants.co.uk
E2 Consultants in Kent are specialists in the provision of high quality and practical acoustic consultancy to both the public and private sectors; typically working with residential and commercial developers, architects, planning consultants, industry, local planning authorities and environmental services.
Pre-Completion Testing
The following table outlines the sets of tests that are required for New and Converted properties.
Property Types | Test Requirements |
Dwelling-houses Including bungalows | Normally, one set of tests should comprise of two individual Sound Insulation Tests (SITs)(two airborne tests):1. Living room (wall) And 2.Bedroom (wall) |
Rooms for Residential Purposes | To conduct a set of tests, the sound insulation between the main rooms should be measured according to the principals set out above for new buildings and material change of use, but adapting them to suit the circumstances. |
Flats with separating floor but not walls | Normally, one set of tests should comprise of four individual SITs (2 x airborn, 2 x impact): 1. Living room (Airborn), 2.Living room (Impact), 3. Bedroom (airborn) and 4. Bedroom (Impact) |
Flats with separating floor and walls | Normally, one set of tests should comprise of six individual SITs (4 x airborne, 2 x impact): 1. living room/living room (floor, airborne), 2. living room/living room (floor, impact), 3. bedroom/bedroom (floor, airborne), 4. bedroom/bedroom (floor, impact), 5. living room/living room (wall, airborne), and 6. bedroom/bedroom (wall, airborne) |
For further Domestic Sound Insulation Design Advice information for your area, be sure to check out Sound-Testing-London.co.uk.
Copyright 2024 E2 Specialist Consultants Limited
Company No. 06728970