Offices Nationwide
Sound Levels
Decibels (dB) are most commonly used as a measure of sound level, but they are also used in electronics, signals and communications...more
Good Hearing?
A typical person with good hearing can hear from about 20Hz to 20kHz (the audio bandwidth). A person's voice will usually range from 500Hz to 2kHz...more
Part F
Means of Ventilation
London - Part E Sound Testing - 020 3390 0301
The office that covers this area is: London
The towns & cities that are covered within this county are:
Acton, Anerley, Balham , Barnes , Battersea, Bayswater, Belgravia, Bermondsey, Bethnal Green, Bexleyheath, Blackheath, Bloomsbury, Bow, Brixton, Brockley, Bromley, Brondesbury, Camberwell, Camden Town, Canning Town, Carshalton, Catford, Charlton , Chelsea, Chingford, Chiswick, City of London, Clapham, Clapton, Clerkenwell, Coulsdon, Covent Garden, Cricklewood, Croydon, Deptford, Dulwich, Ealing, Earls Court, East Dulwich, East Finchley, East Ham, Edmonton, Eltham, Finchley, Forest Gate, Forest Hill, Fulham, Golders Green, Greenwich, Hammersmith, Hampstead, Harefield, Harringay, Hendon, Herne Hill, Highbury, Highgate, Homerton, Hornsey, Islington, Kennington, Kensington, Kentish Town, Kilburn, Kingsbury, Kingston upon Thames, Lambeth, Lee, Lewisham, Leyton, Leytonstone, London, Lower Edmonton, Maida Vale, Manor Park, Marylebone, Mayfair, Merton, Mill Hill, Mitcham, Morden, Mortlake, Muswell Hill, Newcross, New Southgate, North Finchley, North Kenningston, Nottinghill, Paddington, Palmers Green, Peckham, Pilmilco, Pinner, Plaistow, Poplar, Primrose Hill, Purley, Putney, Rotherhithe, Shadwell, Shepherds Bush, Soho, South Kensington, South Lambeth, South Norwood, South Tottenham, South Woodford, Southgate, Spitalfields, St. Johns Wood, Spepney, Stockwell, Stoke Newington, Stratford, Surbiton, Sydenham, Thamesmead, Tooting, Tottenham, Upper Edmonton, Upper Holloway, Victoria, Wallington, Walthamstow, Walworth, Wandsworth, Wanstead, Wapping, Waterloo, Wealdstone, West Brompton, West Earling, West Ham, West Kensington, West Norwood, Westminster, Whitechapel, Willesden, Wimbledon, Wood Green, Woolwich, Worcester Park,
Phone Number: 020 3390 0301 Email: london@e2consultants.co.uk
Sound Testing Part E is sometimes referred to as Domestic Part E Compliance, Domestic Sound Insulation Testing, Domestic Sound Testing, Domestic Acoustic Testing, Domestic Sound & Acoustic Insulation Testing.
E2 Consultants deliver Sound Insulation Testing for new or refurbished dwellings in compliance with Part E of the Building Regulation in London and nationwide.
We actively encourage clients to seek our services at the earliest opportunity as it is possible that the noise mitigation measures required in some instances, could dictate significant changes to external and internal layouts. Therefore our early involvement could remove the need for costly revisions.
As part of our service in London we can also offer advice on the additional requirements of Approved Document Part E including the control of reverberation in common areas and the performance of internal walls and floors.
Our consultants at London can guide you through the process to ensure the best possible chance of achieving sound test passes. Call 020 3390 0301 or email london@e2consultants.co.uk
E2 Consultants in London are specialists in the provision of high quality and practical acoustic consultancy to both the public and private sectors; typically working with residential and commercial developers, architects, planning consultants, industry, local planning authorities and environmental services.
Pre-Completion Testing - The following table outlines the sets of tests that are required for New and Converted properties.
Property Types | Test Requirements |
Dwelling-houses Including bungalows | Normally, one set of tests should comprise of two individual Sound Insulation Tests (SITs)(two airborne tests):1. Living room (wall) And 2.Bedroom (wall) |
Flats with separating floor but not walls | Normally, one set of tests should comprise of four individual SITs (2 x airborn, 2 x impact): 1. Living room (Airborn), 2.Living room (Impact), 3. Bedroom (airborn) and 4. Bedroom (Impact) |
Flats with separating floor and walls | Normally, one set of tests should comprise of six individual SITs (4 x airborne, 2 x impact): 1. living room/living room (floor, airborne), 2. living room/living room (floor, impact), 3. bedroom/bedroom (floor, airborne), 4. bedroom/bedroom (floor, impact), 5. living room/living room (wall, airborne), and 6. bedroom/bedroom (wall, airborne) |
Rooms for Residential Purposes | To conduct a set of tests, the sound insulation between the main rooms should be measured according to the principals set out above for new buildings and material change of use, but adapting them to suit the circumstances. |
For further Part E Sound Testing information for your area, be sure to check out Sound-Testing-East-London.co.uk.
Copyright 2025 E2 Specialist Consultants Limited
Company No. 06728970