Offices Nationwide
Wiltshire - Sound Insulation Design Advice - 0239 366 0106
The office that covers this area is: Portsmouth
The towns & cities that are covered within this county are:
Aldbourne, Alderbury, Allington, Amesbury, Ansty, Axford, Barbury Castle, Beckhampton, Biddestone, Bishopstone, Bradford on Avon, Braydon, Bromham, Broughton Gifford, Burton, Calne, Castle Combe, Cherhill, Chippenham, Chiseldon, Coate, Collingbourne Kingston, Corsham, Cranborne Chase, Devizes, Downton, Eastcott, Enford, Fifield, Foxham, Grafton, Ham, Haxton, Highworth, Lacock, Liddington, Littlecott, Longstreet, Malmesbury, Manton, Melksham, Mere, Monkton Farleigh, Patney, Pewsey, Purton, Ramsbury Ridge, Salisbury, Sedgehill, Snap, Stonehenge, Tidcombe, Tockenham, Trowbridge, Warminster, Wedhampton, Westbury, Wilcot, Wilton, Woodborough, Wootton Bassett, Zeals,
Phone Number: 0239 366 0106 Email: wiltshire@e2consultants.co.uk
Sound Testing Part E is sometimes referred to as Domestic Acoustic Testing, Domestic Sound Testing, Domestic Sound Insulation Testing, Domestic Sound & Acoustic Insulation Testing, Domestic Part E Compliance.
E2 Consultants deliver Sound Insulation Testing for new or refurbished dwellings in compliance with Part E of the Building Regulation in Wiltshire and nationwide.
As part of our service in Wiltshire we can also offer advice on the additional requirements of Approved Document Part E including the control of reverberation in common areas and the performance of internal walls and floors. We actively encourage clients to seek our services at the earliest opportunity as it is possible that the noise mitigation measures required in some instances, could dictate significant changes to external and internal layouts. Therefore our early involvement could remove the need for costly revisions.
E2 Consultants in Wiltshire are specialists in the provision of high quality and practical acoustic consultancy to both the public and private sectors; typically working with residential and commercial developers, architects, planning consultants, industry, local planning authorities and environmental services.
Our consultants at Wiltshire can guide you through the process to ensure the best possible chance of achieving sound test passes. Call 0239 366 0106 or email wiltshire@e2consultants.co.uk
Pre-Completion Testing
The following table outlines the sets of tests that are required for New and Converted properties.
Property Types | Test Requirements |
Dwelling-houses Including bungalows | Normally, one set of tests should comprise of two individual Sound Insulation Tests (SITs)(two airborne tests):1. Living room (wall) And 2.Bedroom (wall) |
Rooms for Residential Purposes | To conduct a set of tests, the sound insulation between the main rooms should be measured according to the principals set out above for new buildings and material change of use, but adapting them to suit the circumstances. |
Flats with separating floor but not walls | Normally, one set of tests should comprise of four individual SITs (2 x airborn, 2 x impact): 1. Living room (Airborn), 2.Living room (Impact), 3. Bedroom (airborn) and 4. Bedroom (Impact) |
Flats with separating floor and walls | Normally, one set of tests should comprise of six individual SITs (4 x airborne, 2 x impact): 1. living room/living room (floor, airborne), 2. living room/living room (floor, impact), 3. bedroom/bedroom (floor, airborne), 4. bedroom/bedroom (floor, impact), 5. living room/living room (wall, airborne), and 6. bedroom/bedroom (wall, airborne) |
For further Sound Insulation Design Advice information for your area, be sure to check out Sound-Testing-Portsmouth.co.uk.
Copyright 2024 E2 Specialist Consultants Limited
Company No. 06728970