Offices Nationwide
How loud is too loud?
Noise above 85 dBA over time will cause hearing loss. In general, the louder the noise, the less time required before hearing loss...more
Sound Levels
Decibels (dB) are most commonly used as a measure of sound level, but they are also used in electronics, signals and communications...more
Examples and specifications for full refurbishment and works on individual elements.
Alford - Commercial BB93 Acoustic Design of Schools - 0141 894 0107
The office that covers this area is: Glasgow
Phone Number: 0141 894 0107 Email: alford@e2consultants.co.uk
At E2 Consultants in Alford we offer nationwide acoustic consultancy, which involves comprehensive services across all aspects of noise measurement, assessment and control.
E2 Consultants have Commercial BB93 Acoustic Design of Schools consultants in Alford specialising in the provision of high quality and practical acoustic consultancy to both the public and private sectors; typically working with residential and commercial developers, architects, planning consultants, industry professionals, local planning authorities and environmental services.
E2 Consultants' Commercial BB93 Acoustic Design of Schools consultants in Alford have been involved in building and architectural projects at all stages of development, from the specification of the external building envelope and internal separating elements, through to pre-completion testing. Our expert advice has been sought after for different types of new build, refurbished and converted developments including residential, commercial, entertainment, leisure and hotels in addition to a wide variety of mixed-use developments.
We actively encourage clients in Alford to seek our services at the earliest opportunity since the integration of acoustic issues into the overall design of a development should remove the need for costly revisions.
We believe that our Commercial BB93 Acoustic Design of Schools service delivery across the UK is second to none and that clients retain our expert services because of our continuous commitment to providing high quality and cost-effective advice. For a quote or more information, call one of our UK consultants in Alford on 0141 894 0107 or email alford@e2consultants.co.uk.
The onus is on the developer to perform pre-completion testing before the property can be 'released to market' and it is now an offence not to perform pre-completion testing.
In July 2003, the new Approved Document E 'Resistance to the Passage of Sound' (ADE 2003) of the Building Regulations came into force. This requires that new residential properties and rooms for residential purposes be tested (known as pre-completion testing) to demonstrate compliance with the explicit sound insulation performance requirements of ADE 2003.
Guidance in ADE 2003 on pre-completion testing indicates that tests should be carried out at a rate of one set of tests of each construction sub-group completed, whatever the size of the development and thereafter at least one set of tests every ten completions (assuming no failures).
We often advise property developers, contractors, housing associations and local authorities on the implications of ADE 2003. Advice is given on the materials and construction details for separating floors and walls and the key interfaces with other building elements. We also offer advice on the additional requirements of ADE 2003 including the control of reverberation in common areas and the performance of internal walls and floors. We are advising a number of clients on the practical application of RSDs as in some instances the option for construction are potentially reduced and construction costs may be significantly higher than those of a non-RSD structure.
Pre-Completion Testing - The following table outlines the sets of tests that are required for new and converted properties.
| Property Types | Test Requirements |
Dwelling-houses (including bungalows) |
One set of tests would normally comprise of two individual Sound Insulation Tests (SITs) and two airborne tests: |
Flats with separating floor but not walls |
One set of tests should normally comprise of four individual SITs (2 x airborne, 2 x impact):
1. Living room (airborne), |
Flats with separating floor and walls |
One set of tests should comprise of six individual SITs (4 x airborne, 2 x impact):
1. living room/living room (floor, airborne), |
Rooms for Residential Purposes |
To conduct a set of tests, the sound insulation between the main rooms should be measured according to the principals set out above for new buildings and material change of use, but adapting them to suit the circumstances. |
Warning: count(): Parameter must be an array or an object that implements Countable in /data04/elite/public_html/Office.php on line 755
For further Commercial BB93 Acoustic Design of Schools information for your area, be sure to check out Sound-Testing-Glasgow.co.uk.
Our other services include:
Commercial BB93 Acoustic Design of Schools can also be known as:
Sound Testing Rooms for Residential Purposes, Commercial Party Wall Sound Testing, Commercial Party Floor Sound Insulation Testing, Commercial Sound Insulation Testing, Party Floor Sound Testing, Commercial Sound Testing Hotel, Party Floor Sound Insulation Testing, Sound Testing Hotel, Commercial Sound Testing Schools, Sound Insulation Testing, Sound Testing HMO, Sound Testing Schools, Commercial Sound Testing Rooms for Residential Purposes, Commercial Sound Testing HMO, Party Wall Sound Testing, Commercial Party Wall Sound Insulation Testing, Reverberation Sound Testing, Acoustic Insulation Testing, Sound Testing, Commercial Party Floor Sound Testing, Commercial Sound Testing, Commercial Reverberation Sound Testing, Commercial Acoustic Insulation Testing,
Copyright 2025 E2 Specialist Consultants Limited
Company No. 06728970