Offices Nationwide
Environmental Noise Levels
The max exposure time at 85 dBA is 8 hours, at 110 dBA it's just 1 min 29 seconds. If exposed, limit the time and wear hearing protection...more
Air Testing & Leakage
Our engineers use Thermal camera and extensive knowledge of buildings to help find leakage areas within the building and can advice of these.
Bolsover - Duct Testing - 0114 368 0192
The office that covers this area is: Sheffield
Phone Number: 0114 368 0192 Email: bolsover@e2consultants.co.uk
Part F Ventilation Testing is sometimes referred to as Part F Testing & Compliance, Part F Ventilation Testing, Part F Compliance, Part F Testing, Ventilation Testing & Compliance.
Duct Testing - Bolsover
What is Duct Testing?
Part F Building Regulations 2010 introduced the requirement to verify practical performance of ventilation in new dwellings against design. This requires validation of airflow measurements for every dwelling constructed under this edition of the Building Regulations as well as ensuring that the system has been configured correctly. Building Regulation Part L requires buildings to be 'better sealed' and 'more airtight'. In the new Part F 2010 Document, provisions have been designed to ventilate buildings having air permeability down to 3m3/hr/m2 at 50 Pa, therefore allowing designers to plan to 'worst case' as Building Regulation document Part L allows air permeability up to 10 m3/hr/m2.
The purpose of Building Regulation Part F 2010 - F1 'Means of ventilation' is to ensure that 'adequate means of ventilation is provided for people in the building', therefore improving the performance of the building and the indoor air quality for occupants of both new and existing dwellings in Bolsover.
Each component of the properties ventilation system will be tested individually for example extraction fans and oven hoods, the equipment is simply placed over the ventilation system to be tested and a flow reading is taken on a connected piece of electronic equipment to generate the reading.
Part F testing validates air flow measurements for the new dwelling and ensures that the system has been configured correctly. All of our engineers are BPEC Qualified and have year of experience and significant track record in the building services industry.
We pride ourselves in Bolsover on the quality of our team. Our energy and compliance consultants are personable and professional with the ability to communicate clearly at any level;
E2 Consultants is strategically placed across a network of 14 regional offices throughout the UK to carry out Duct Testing - as it can usually be covered at the same time as your air permeability or sound insulation testing by our multi-disciplined consultants and engineers. Discounts are applied when we carry out multiple services in single visits and we can combine our services to create great cost effective packages for our clients in Bolsover.
If you would like a quote for Duct Testing in Bolsover call one of our regional offices and speak to one of our experts on 0800 043 8100 for a formal quotation or email bolsover@e2consultants.co.uk.
Copyright 2024 E2 Specialist Consultants Limited
Company No. 06728970