Offices Nationwide
Sound Insulation
Two parameters describe sound insulation; Dw and Rw. Dw is the insulation between rooms. Rw is the lab-tested insulation of a wall/floor...more
Sound Levels
Decibels (dB) are most commonly used as a measure of sound level, but they are also used in electronics, signals and communications...more
It is the law to provide an Energy Performance Certificate for all new and newly built homes.
Kingsbury - Sound Testing HMO - 020 3390 0301
The office that covers this area is: London
Phone Number: 020 3390 0301 Email: kingsbury@e2consultants.co.uk
At E2 Consultants in Kingsbury we offer nationwide acoustic consultancy, which involves comprehensive services across all aspects of noise measurement, assessment and control.
E2 Consultants have Sound Testing HMO consultants in Kingsbury specialising in the provision of high quality and practical acoustic consultancy to both the public and private sectors; typically working with residential and commercial developers, architects, planning consultants, industry professionals, local planning authorities and environmental services.
E2 Consultants' Sound Testing HMO consultants in Kingsbury have been involved in building and architectural projects at all stages of development, from the specification of the external building envelope and internal separating elements, through to pre-completion testing. Our expert advice has been sought after for different types of new build, refurbished and converted developments including residential, commercial, entertainment, leisure and hotels in addition to a wide variety of mixed-use developments.
We actively encourage clients in Kingsbury to seek our services at the earliest opportunity since the integration of acoustic issues into the overall design of a development should remove the need for costly revisions.
We believe that our Sound Testing HMO service delivery across the UK is second to none and that clients retain our expert services because of our continuous commitment to providing high quality and cost-effective advice. For a quote or more information, call one of our UK consultants in Kingsbury on 020 3390 0301 or email kingsbury@e2consultants.co.uk.
Guidance in ADE 2003 on pre-completion testing indicates that tests should be carried out at a rate of one set of tests of each construction sub-group completed, whatever the size of the development and thereafter at least one set of tests every ten completions (assuming no failures).
Advice is given on the materials and construction details for separating floors and walls and the key interfaces with other building elements. We also offer advice on the additional requirements of ADE 2003 including the control of reverberation in common areas and the performance of internal walls and floors.
The onus is on the developer to perform pre-completion testing before the property can be 'released to market' and it is now an offence not to perform pre-completion testing. We often advise property developers, contractors, housing associations and local authorities on the implications of ADE 2003.
In July 2003, the new Approved Document E 'Resistance to the Passage of Sound' (ADE 2003) of the Building Regulations came into force. This requires that new residential properties and rooms for residential purposes be tested (known as pre-completion testing) to demonstrate compliance with the explicit sound insulation performance requirements of ADE 2003.
We advise a number of clients on the practical application of RSDs as in some instances the option for construction are potentially reduced and construction costs may be significantly higher than those of a non-RSD structure.
Pre-Completion Testing
The table below outlines the sets of tests required for new and converted properties.
| Property Types | Test Requirements |
Dwelling-houses Including bungalows |
Normally, one set of tests should comprise of two individual Sound Insulation Tests (SITs)(two airborne tests):1. Living room (wall) And 2.Bedroom (wall) |
Flats with separating floor but not walls |
Normally, one set of tests should comprise of four individual SITs (2 x airborne, 2 x impact): 1. Living room (airborne), 2.Living room (Impact), 3. Bedroom (airborne) and 4. Bedroom (Impact) |
Flats with separating floor and walls |
Normally, one set of tests should comprise of six individual SITs (4 x airborne, 2 x impact): 1. living room/living room (floor, airborne), 2. living room/living room (floor, impact), 3. bedroom/bedroom (floor, airborne), 4. bedroom/bedroom (floor, impact), 5. living room/living room (wall, airborne) and 6. bedroom/bedroom (wall, airborne) |
Rooms for Residential Purposes |
To conduct a set of tests, the sound insulation between the main rooms should be measured according to the principals set out above for new buildings and material change of use, but adapting them to suit the circumstances. |
Warning: count(): Parameter must be an array or an object that implements Countable in /data04/elite/public_html/Office.php on line 755
For further Sound Testing HMO information for your area, be sure to check out Sound-Testing-London.co.uk.
Our other services include:
Sound Testing HMO can also be known as:
Commercial Party Floor Sound Testing, Sound Testing, Commercial Sound Testing Rooms for Residential Purposes, Party Floor Sound Testing, Commercial Sound Testing Schools, Commercial Party Wall Sound Insulation Testing, Commercial Party Floor Sound Insulation Testing, Sound Testing Schools, Commercial Sound Insulation Testing, Sound Testing Hotel, Commercial Sound Testing, Acoustic Insulation Testing, Commercial BB93 Acoustic Design of Schools, Party Wall Sound Testing, Commercial Reverberation Sound Testing, Party Floor Sound Insulation Testing, Sound Testing Rooms for Residential Purposes, Commercial Acoustic Insulation Testing, Reverberation Sound Testing, Commercial Party Wall Sound Testing, Commercial Sound Testing HMO, Sound Insulation Testing, Commercial Sound Testing Hotel,
Copyright 2025 E2 Specialist Consultants Limited
Company No. 06728970