Rhoose - SAP Ratings - 029 2193 0147

The office that covers this area is: Cardiff

Phone Number: 029 2193 0147 Email: rhoose@e2consultants.co.uk

SAP Calculations is sometimes referred to as SAP Conversion Calculations, SAP Conversion Calcs, Part L1B Compliance, SAP Conversion rating, SAP Conversion Calc, SAP Conversion Assessment.

What Is A SAP Calculation?

The higher the SAP rating, the lower the cost will be to run the building. The score represents the cost of energy required by a property over the course of a year with a 100 score meaning there's no energy cost. To calculate the SAP, the assessor uses information relating to lighting, heating, hot water systems, renewable technolgies used and the elements of structure.

SAP calculations are the Government's Standard Assessment Procedure for Energy Ratings. In order to produce an On Construction EPC (Energy Performance Certificate) or a Predicted Energy Assessment (PEA), a SAP is required, as this is the calculation these certificates are based on.

How Is A SAP Assessment Undertaken?

The SAP software will determine if a building complies with Building Regulations in Rhoose using the information provided by the SAP assessment. This crucial information relates to the type of dwelling, floors, walls, the roof, windows, doors, lighting, renewable technologies, 'U' values, hot water and ventilation.

Amongst other things, the SAP assessor will determine how good the thermal elements are in the floors and walls as well as how well heat passes through these elements - this is known as a 'U' value. A high 'U' value represents a high amount of heat lost - this is used in the SAP calculation which is done off-site but requires plans and drawings of the site in order to be calculated.

Why Do I Need A SAP Calculation?

When changes are made to the heating, hot water provision or air conditioning/ventilation services, it is the responsibility of the builder to provide any On Construction EPCs upon completiong of a new home or conversion into fewer or more units.

If you are selling a home before it has been built, you will need to provide information about energy efficiency in a Predicted Energy Assessment (PEA).

Under Part L of Building Regulations in Rhoose, since 2006, any new dwellings or conversions need to have a SAP Calculation and Predicted EPC before any work can begin.