Offices Nationwide
Reverberation Time
The reverberation time of a room is defined as the time it takes for sound to decay by 60 dB after an abrupt termination...more
Sound Insulation
Two parameters describe sound insulation; Dw and Rw. Dw is the insulation between rooms. Rw is the lab-tested insulation of a wall/floor...more
Part L2A
Conservation of fuel and power in new builds other than dwellings
Sandown - BREEAM HEA05 Acoustic Performances - 0239 366 0106
The office that covers this area is: Portsmouth
Phone Number: 0239 366 0106 Email: sandown@e2consultants.co.uk
BREEAM is sometimes referred to as BREEAM Assessment Ratings, BREEAM Reports, BREEAM Assessors, BREEAM Rating, BREEAM Assessments.
How Is BREEAM Assessed?
Covering a range of environmental issues in Sandown, BREEAM looks at a building's impact on transport, waste, energy, health, water, pollution, materials, management and ecology to assess whether a building is Outstanding, Excellent, Very Good, Good or a Pass. Covering more than 50 countries and 250,000 buildings, BREEAM's aim is to educate building owners, designers and occupants about their impact on the local area.
How To Achieve BREEAM Excellence
To achieve an Excellent score in Sandown you'll need to score 70% or above where an Outstanding rating is for 85% and up. To just pass the assessment the building will need to score 30% or above with anything lower marked as Unclassified.
What Is A BREEAM Rating?
The BREEAM ratings for a new, non-domestic building in Sandown are:
- Pass: standard good practice (top 75%)
- Good: intermediate good practice (top 50%)
- Very Good: advanced good practice (top 25%)
- Excellent: best practice (top 10%)
- Outstanding: innovator (top 1%)
The maximum score a building can achieve in Sandown is 100% from a BREEAM assessment. It used to be that 'Good' was the maximum level that could be achieved, however in 2008 a new 'Outstanding' category was added. The percentage required for each level remained the same despite this.
Book Your BREEAM Assessment
For further information or to book your BREEAM assessment in Sandown, call one of your BREEAM assessors on 0239 366 0106 or email breeam@e2consultants.co.uk.
What Does BREEAM Stand For?
First published by the Building Reseearch Establishment (BRE) in 1990 covering buildings across Sandown, BREEAM stands for Building Research Establishment's Enviromental Assement Method.
What Are The Benefits of BREEAM?
BREEAM aims to show that by building with the local area in mind, though capital costs may increase, you should save on operational costs in the long-term. This limits investor costs and makes the building more attractive when it comes to selling.
A BREEAM certification is a way of validating how good a building in Sandown is in terms of the environmental impact through a globally recognised standard. It's the hope that the BREEAM assessment will help building owners and designers to improve their carbon footprint and make better use of their resources.
Copyright 2024 E2 Specialist Consultants Limited
Company No. 06728970