Sevenoaks - Standard Assessment Procedures - 020 3390 0301

The office that covers this area is: London

Phone Number: 020 3390 0301 Email: sevenoaks@e2consultants.co.uk

SAP Calculations is sometimes referred to as SAP Conversion Calc, SAP Conversion Calcs, Part L1B Compliance, SAP Conversion Assessment, SAP Conversion rating, SAP Conversion Calculations.

What Is A SAP Calculation?

A SAP calculation, the Government's Standard Assessment Procedure for Energy Ratings, is required to produce an On Construction EPC (Energy Performance Certificate) or a Predicted Energy Assessment (PEA).

The higher the SAP rating, the lower the cost will be to run the building. The score represents the cost of energy required by a property over the course of a year with a 100 score meaning there's no energy cost. To calculate the SAP, the assessor uses information relating to lighting, heating, hot water systems, renewable technolgies used and the elements of structure.

Why Do I Need A SAP Calculation?

You will need to provide information about energy efficiency in a Predicted Energy Assessment (PEA) if you are planning to sell the property before it has been built.

It is the responsibility of the builder to provide any On Construction EPCs when a home is constructed. This will also apply if a building is converted into fewer or more units (material change of use) and changes are made to the heating, hot water provision or air conditioning/ventilation services.

Under Part L of Building Regulations in Sevenoaks, since 2006, any new dwellings or conversions need to have a SAP Calculation and Predicted EPC before any work can begin.

How Is A SAP Assessment Undertaken?

The SAP software will determine if a building complies with Building Regulations in Sevenoaks using the information provided by the SAP assessment. This crucial information relates to the type of dwelling, floors, walls, the roof, windows, doors, lighting, renewable technologies, 'U' values, hot water and ventilation.

Amongst other things, the SAP assessor will determine how good the thermal elements are in the floors and walls as well as how well heat passes through these elements - this is known as a 'U' value. A high 'U' value represents a high amount of heat lost - this is used in the SAP calculation which is done off-site but requires plans and drawings of the site in order to be calculated.