Offices Nationwide 

Tewkesbury - Commercial Sound Testing Rooms for Residential Purposes - 029 2193 0147

The office that covers this area is: Cardiff

Phone Number: 029 2193 0147 Email: tewkesbury@e2consultants.co.uk

Commercial_Sound_Testing is sometimes referred to as Commercial Sound & Acoustic Insulation Testing, Commercial Sound Testing, Commercial Sound Insulation Testing, Commercial Part E Compliance, Commercial Acoustic Testing.

Commercial Sound Testing Rooms for Residential Purposes Testing in Tewkesbury

E2 Consultants specialise in the provision of high quality and practical acoustic consultancy to both the public and private sectors; typically working with residential and commercial developers, architects, planning consultants, industry, local planning authorities and environmental services.

We believe that our Commercial Sound Testing Rooms for Residential Purposes consultants, service delivery across the UK is second to none and that clients retain our expert services because of our continuous commitment to providing high quality and cost effective advice. Our expert advice has been sought for different types of new build, refurbished and converted developments including residential, commercial, entertainment, leisure and hotels, in addition to a wide variety of mixed-use developments.

We actively encourage clients in Tewkesbury to seek our services at the earliest opportunity since the integration of acoustic issues into the overall design of a development should remove the need for costly revisions.

E2 Consultants's Commercial Sound Testing Rooms for Residential Purposes testing consultants in Tewkesbury have been involved in building and architectural projects at all stages of development, from the specification of the external building envelope and internal separating elements, through to pre-completion testing.

For a quote or more information call one of our UK consultants in Tewkesbury on 029 2193 0147 or email tewkesbury@e2consultants.co.uk.

At E2 Consultants we offer nationwide acoustic consultancy, which involves comprehensive services across all aspects of noise measurement, assessment and control.

The onus is on the developer to perform pre-completion testing before the property can be 'released to market' and it is now an offence not to perform pre-completion testing.

In July 2003, the new Approved Document E 'Resistance to the Passage of Sound' (ADE 2003) of the Building Regulations came into force. This requires that new residential properties and rooms for residential purposes be tested (known as pre-completion testing) to demonstrate compliance with the explicit sound insulation performance requirements of ADE 2003.

Guidance in ADE 2003 on pre-completion testing indicates that tests should be carried out at a rate of one set of tests of each construction sub-group completed, whatever the size of the development and thereafter at least one set of tests every ten completions (assuming no failures).

We often advise property developers, contractors, housing associations and local authorities on the implications of ADE 2003. Advice is given on the materials and construction details for separating floors and walls and the key interfaces with other building elements. We also offer advice on the additional requirements of ADE 2003 including the control of reverberation in common areas and the performance of internal walls and floors. We are advising a number of clients on the practical application of RSDs as in some instances the option for construction are potentially reduced and construction costs may be significantly higher than those of a non-RSD structure.

Pre-Completion Testing - The following table outlines the sets of tests that are required for new and converted properties.

Property Types Test Requirements

Dwelling-houses (including bungalows)

One set of tests would normally comprise of two individual Sound Insulation Tests (SITs) and two airborne tests:
1. Living room (wall)
2.Bedroom (wall)

Flats with separating floor but not walls

One set of tests should normally comprise of four individual SITs (2 x airborne, 2 x impact): 1. Living room (airborne),
2. Living room (Impact),
3. Bedroom (airborne)
4. Bedroom (Impact)

Flats with separating floor and walls

One set of tests should comprise of six individual SITs (4 x airborne, 2 x impact): 1. living room/living room (floor, airborne),
2. living room/living room (floor, impact),
3. bedroom/bedroom (floor, airborne),
4. bedroom/bedroom (floor, impact),
5. living room/living room (wall, airborne)
6. bedroom/bedroom (wall, airborne)

Rooms for Residential Purposes

To conduct a set of tests, the sound insulation between the main rooms should be measured according to the principals set out above for new buildings and material change of use, but adapting them to suit the circumstances.

For further Commercial Sound Testing Rooms for Residential Purposes information for your area, be sure to check out Sound-Testing-Cardiff.co.uk.

E2 Specialist Consultants
August 13 at 1:29pm
Today takes 2 of our engineers, air testing this enormous modular classroom in Tring, It took 4 fans to test this space and unfortunately resulted in a Fail. Remedial sealing will be required to areas that we have identified as leaking cold air infiltration. #preperationiskey

E2 Consultants Delivering compliance solutions for Architects & Developers    Head Office E2 HOUSE, South Park Way, Wakefield 41 Business Park, WF2 0XJ    Questions? Call: 0800 043 8100