Nottinghamshire - Standard Assessment Procedure - 0114 368 0192

The office that covers this area is: Sheffield

The towns & cities that are covered within this county are:
Alverton, Annesley, Askham, Aslockton, Averham, Awsworth, Babworth, Balderton, Barnby Moor, Barnby in the Willows, Barton in Fabis, Bathley, Beckingham cum Saundby, Beeston, Besthorpe, Bestwood St Albans, Bilsthorpe, Bingham, Bleasby, Blidworth, Blyth, Bole, Bothamsall, Bradmore, Brinsley, Bulcote, Bunny, Burton Joyce, Calverton, Car Colston, Carburton, Carlton in Lindrick, Carlton on Trent, Caunton, Caythorpe, Clarborough, Clayworth, Clipston, Coddington, Collingham, Colwick, Cotgrave, Cromwell, Eakring, East Drayton, Eastwood, Edingley, Elston, Fardon, Flintham, Gamston, Gotham, Greasley, Harby, Hawksworth, Hickling, Holme, Hucknall, Keyworth, Kimberley, Kirkby in Ashfield, Kirton, Lound, Mansfield, Mapelbeck, Market Warsop, Newark, Norton, Nottingham, Oxton, Radcliffe on Trent, Rainworth, Retford, Southwell, Sutton in Ashfield, West Bridgford, Worksop,

Phone Number: 0114 368 0192 Email: nottinghamshire@e2consultants.co.uk

SAP Calculations is sometimes referred to as SAP Conversion Calc, SAP Conversion Calculations, SAP Conversion Calcs, SAP Conversion rating, SAP Conversion Assessment, Part L1B Compliance.

How Is A SAP Assessment Undertaken?

The crucial information needed for the SAP software relates to the type of dwelling, floors, walls, the roof, windows, doors, lighting, renewable technologies, 'U' values, hot water and ventilation. With this, we can determine if a building complies with Building Regulations in Nottinghamshire.

Amongst other things, the SAP assessor will determine how good the thermal elements are in the floors and walls as well as how well heat passes through these elements - this is known as a 'U' value. A high 'U' value represents a high amount of heat lost - this is used in the SAP calculation which is done off-site but requires plans and drawings of the site in order to be calculated.

Why Do I Need A SAP Calculation?

It is the responsibility of the builder to provide any On Construction EPCs when a home is constructed. This will also apply if a building is converted into fewer or more units (material change of use) and changes are made to the heating, hot water provision or air conditioning/ventilation services.

Any conversions or new dwellings need to have a SAP Calculation and Predicted EPC before any work can begin as outlined in Part L of Building Regulations in Nottinghamshire in 2006.

If you are selling a home before it has been built, you will need to provide information about energy efficiency in a Predicted Energy Assessment (PEA).

What Is A SAP Calculation?

SAP calculations are the Government's Standard Assessment Procedure for Energy Ratings. In order to produce an On Construction EPC (Energy Performance Certificate) or a Predicted Energy Assessment (PEA), a SAP is required, as this is the calculation these certificates are based on.

The higher the SAP rating, the lower the cost will be to run the building. The score represents the cost of energy required by a property over the course of a year with a 100 score meaning there's no energy cost. To calculate the SAP, the assessor uses information relating to lighting, heating, hot water systems, renewable technolgies used and the elements of structure.