Staffordshire - Room Integrity Testing - 0121 381 0129

The office that covers this area is: Birmingham

The towns & cities that are covered within this county are:
Abbots Bromley, Above Church, Acton Trussell, Adbaston, Allgreave, Alton, Amington, Anslow, Armitage, Bagnall, Balterley, Barton-under-Needwood, Basford, Berkswick, Biddulph, Bilthbury, Bobbington, Branston, Broad Meadow, Burntwood, Burston, Burton upon Trent, Cannock, Caverswall, Cheadle, Chesterton, Codsall, Coton, Cross Heath, Denstone, Eccleshall, Elmhurst, Fazeley, Fole, Froghall, Grindley, Hamstall Ridware, Haughton, Hednesford, Horton, Keele, Kingstone, Leek, Lichfield, Loggerheads, Marchington Woodlands, Middleport, Milton, Newton, Oakamoor, Oulton, Penkridge, Perton, Rocester, Rugeley, Sandon, Silverdale, Stafford, Stoke on Trent, Stone, Stramshall, Stretton, Tamworth, Trentham, Tutbury, Upper Hulme, Uttoxeter, Wall, Westlands, Whitmore,

Phone Number: 0121 381 0129 Email: staffordshire@e2consultants.co.uk

Room Integrity Testing

What Is It?

Room Integrity Testing is required for any gaseous fire suppression system. Gas fire suppression systems work by releasing a gas agent into an enclosure and the gas then either reacts with the fire or reduces the oxygen level which then suppresses or extinguishes the fire. For a fire suppression system to work correctly the enclosure needs to hold the gas for a set period of time.

How Does It Work?

By pressuring a room with a door fan test and then measuring the pressure release period with sensors to a pre-determined level, we can determine if the room has enough integrity to hold the type of gas agent the fire suppression system is designed for. This test will predict how long it will take for the gas to descend to a certain level without having to carry out a discharge of the system, which can be costly and disruptive.

Does the Test Cause Disruption?

No - people can work in the room and the testing does not affect any equipment in the room. The door fan test equipment is fixed to the main door and will prevent people from leaving or entering the room from the point that it is sealed in place.

What are the Standards and Guidance?

The main standards that recommend Room Integrity Testing on commissioning of a system and the annual re-testing of an enclosure are BSEN15004, ISO14520, BAFE SP203-3 and NFPA 2001. These are UK and US national and international standards that provide guidance on how to carry out the test and the frequency of re-testing.

Testing Procedure

Upon arriving at site and the equipment's unloaded, a consultant will inspect the room to be tested. If not done prior to our site visit the room measurements will also be taken. Our consultant will set our door kit and fan up in the most appropriate door within the room. Please note, there will be no requirement for the removal of any doors to allow for our testing equipment.

The test will depressurise and pressurise the room whilst using computer software to collect the data. Once complete, our consultant will check the data against target data provided by the client. If the result is lower than the target score then our consultantrs will beging to identify the problem areas.

All of our consultants are trained to use thermographic cameras to help identify these leakage areas, these images will be sent to the client with a full test report as well as the snag list. The snag list will outlineall the identified leakage areas that will need to be addressed along.

Will The Room Ever Require Another Test If It Passes?

Any room, particularly Electronic Data Processing rooms, often get disturbed by building service work and general building work. Should a small hole be made in the enclosure, or the room size changes, then a retest of the room integrity is required. British Standards recommend that Room Integrity Testing is carried out at least annually to ensure your gaseous fire suppression system will work correctly.

Our other services include:

Room Integrity Testing can also be known as:
Server Room Testing, Fire Suppression Testing, Fire Suppression Room Integrity Testing,